LVC-4000信号调节模块
  • 产品介绍

LVC-4000.pdf


产品说明:


        The EAZY-CAL™ LVC-4000 is a standalone signal conditioner,supporting a wide range of AC LVDTs, RVDTs, and VR half-bridges,while providing several choices of voltage, current, and digital RS-485 outputs. Push-button calibration offers intuitive operation as compared to signal conditioners with span and offset trim pots. Fault conditions,such as a wire break on LVDT/RVDT connections, are indicated by blinking LEDs, fault condition error output, and Error Flag Open Collector signal (see manual for details). The LVC-4000 operates from a 9-30V DC power supply and is housed in a polyamide DIN railmounted enclosure. Calibration instructions, terminal functions, LVDT connection diagram and DIP switch functions are printed on the side panels for convenience.

        Synchronization to other signal conditioners is accomplished by a daisy chain connection to a synchronization bus. One unit will assume the Master function based on DIP switch priority setting. If a fault should occur, the next highest priority unit will take over as Master.

        With the use of the RS-485 port, a host computer is able to retrieve measurement data, receive operational status, perform remote calibration, and perform hot swap reconfiguration.



技术指标:


类       型:  LVDT/RVDT信号调节模块  

频       率  2.5, 5, 7.5,10 kHz  
输       出:  05VDC, 010VDC, 0.54.5VDC, ±5VDC, ±10VDC,420 mA  
工作温度:  -20℃~75℃  
供电电源:  9~30VDC
电气连接:  电缆 
特       点:  DIN轨道安装,RS485接口,主/从机励磁同步 
典型应用:  气体、蒸汽轮机控制系统,纸张网前箱控制



上一页 下一页

商品信息
电商缩略图展示

0

库存充足

已选0